This right hand chute door fits standard laundry and trash chute intakes. The unit hinges on the side, so it opens toward the right hand. Therefore it works well for new installs and for direct swaps of worn units.

No. 4 finish stainless steel forms the body. A border trim frames the opening. Also, the face shows no exposed welds or solder seams, so staff can wipe it clean in seconds. The front uses 20 gauge steel, while the back steps up to a heavier 18 gauge for strength, and we build every door in the USA.

Features Of This Intake Unit

Users open this unit by hand, and it then closes on its own. A keyed-alike cylinder lock secures it, while the latch holds it shut. Because the latch grabs each time, the panel stays closed after every use. Additionally, silent operation keeps hallway noise down.

Fire Rating

This panel carries a UL label, so it meets fire code needs. In fact, it holds a 1.5 hour rating with a UL Class B label at 250°F maximum temperature rise. In addition, our doors meet the latest national building codes, plus NFPA-82 and ASTM standards. However, you should always follow the manufacturer instructions and your local fire code when you install or service it.

Specifications For This Right Hand Chute Door

Overall dimensions for this side hinged intake door. Measure the cut-out in the chute wall, not the door panel and not the trim.

The stainless body resists rust and daily wear, and the keyed alike cylinder means one key opens every matching door on the same job. Full specifications are listed in the Additional information tab above.

Not sure this is your size? Run our free trash chute door fit check or call 203-304-9000 before you order.

References: MB2121, 2121SH, SH2121, SHU2121

Order This Right Hand Chute Door

Do you need help confirming fit? First, our team checks your opening size and hinge side. Then we guide your order. So call us at 203-304-9000 and we will help you pick the right part quickly.

This door replaces Midland, US Chutes, and Wilkinson Hi-Rise chute doors. We also build custom solutions for Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Hi-Rise Recycling Systems, Midland Metalcraft, Valiant Chutes, and Western Chutes. Simply contact us with your measurements for a custom quote.

The post 21″ x 21″ Right Hand – Side Hinged (SH) Chute Intake Door appeared first on Action Chutes.

This right hand chute door fits standard laundry and trash chute intakes. The unit hinges on the side, so it opens toward the right hand. Therefore it works well for new installs and for direct swaps of worn units.

No. 4 finish stainless steel forms the body. A border trim frames the opening. Also, the face shows no exposed welds or solder seams, so staff can wipe it clean in seconds. The front uses 20 gauge steel, while the back steps up to a heavier 18 gauge for strength, and we build every door in the USA.

Features Of This Intake Unit

Users open this unit by hand, and it then closes on its own. A keyed-alike cylinder lock secures it, while the latch holds it shut. Because the latch grabs each time, the panel stays closed after every use. Additionally, silent operation keeps hallway noise down.

Fire Rating

This panel carries a UL label, so it meets fire code needs. In fact, it holds a 1.5 hour rating with a UL Class B label at 250°F maximum temperature rise. In addition, our doors meet the latest national building codes, plus NFPA-82 and ASTM standards. However, you should always follow the manufacturer instructions and your local fire code when you install or service it.

Specifications For This Right Hand Chute Door

Overall dimensions for this side hinged intake door. Measure the cut-out in the chute wall, not the door panel and not the trim.

The stainless body resists rust and daily wear, and the keyed alike cylinder means one key opens every matching door on the same job. Full specifications are listed in the Additional information tab above.

Not sure this is your size? Run our free trash chute door fit check or call 203-304-9000 before you order.

References: MB1818, 1818SH, SH1818, SHU1818

Order This Right Hand Chute Door

Do you need help confirming fit? First, our team checks your opening size and hinge side. Then we guide your order. So call us at 203-304-9000 and we will help you pick the right part quickly.

This door replaces Midland, US Chutes, and Wilkinson Hi-Rise chute doors. We also build custom solutions for Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Hi-Rise Recycling Systems, Midland Metalcraft, Valiant Chutes, and Western Chutes. Simply contact us with your measurements for a custom quote.

The post 18″ x 18″ Right Hand – Side Hinged (SH) Chute Intake Door appeared first on Action Chutes.

Side Hinged Intake Door Specifications

• Size: 15 inch by 15 inch opening, right hand, side hinged
• Stainless steel with a No. 4 finish and border trim, no exposed welds or solder seams
• Hand operated, silent, self closing, and self latching
• Cylinder lock keyed alike
• UL labeled and UL Certified, 1.5 hour fire rated, UL Class B Label, 250 F maximum temperature rise
• 20 gauge front and heavier 18 gauge back for added strength
• Complies with NFPA-82 and ASTM standards and current national building codes
• Made in the USA

Why choose a stainless steel intake door

Stainless steel stands up to daily use and cleaning. Because of this, it fits busy buildings like apartments, hospitals, hotels, and dormitories. The No. 4 finish resists corrosion. It also wipes down easily. In addition, the 20 gauge front and 18 gauge back add strength at the point of contact. Finally, the door is self closing and self latching. As a result, it returns to a closed and locked position after every use. This supports the fire rating of the chute system.

What it fits

This 15 inch intake door can replace Midland, US Chutes, and Wilkinson Hi Rise chute doors. In addition, we build custom sizes for many other manufacturers. If you are not sure which size or hinge type your building needs, send us your measurements. Then we will confirm the right fit.

Ordering and lead time

We build these doors to order. We also offer custom size solutions for new construction and replacement projects. Call us at 203-304-9000 with your opening size and requirements. Then we will provide a quote and confirm current lead times. If you need faster shipping, just call. We will do our best to help.

Measure the cut-out in the chute wall, not the door panel and not the trim. Not sure? Run our free trash chute door fit check or call 203-304-9000 before you order.

References: MB1515, 1515SH, SH1515, SHU1515

This door replaces Midland, US Chutes, and Wilkinson Hi-Rise chute doors. We also build custom solutions for Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Hi-Rise Recycling Systems, Midland Metalcraft, Valiant Chutes, and Western Chutes. Simply contact us with your measurements for a custom quote.

The post 15″ x 15″ Right Hand – Side Hinged (SH) Intake Access Door appeared first on Action Chutes.

This right hand chute door fits standard laundry and trash chute intakes. The unit hinges on the side, so it opens toward the right hand. Therefore it works well for new installs and for direct swaps of worn units.

No. 4 finish stainless steel forms the body. A border trim frames the opening. Also, the face shows no exposed welds or solder seams, so staff can wipe it clean in seconds. The front uses 20 gauge steel, while the back steps up to a heavier 18 gauge for strength, and we build every door in the USA.

Features Of This Intake Unit

Users open this unit by hand, and it then closes on its own. A keyed-alike cylinder lock secures it, while the latch holds it shut. Because the latch grabs each time, the panel stays closed after every use. Additionally, silent operation keeps hallway noise down.

Fire Rating

This panel carries a UL label, so it meets fire code needs. In fact, it holds a 1.5 hour rating with a UL Class B label at 250°F maximum temperature rise. In addition, our doors meet the latest national building codes, plus NFPA-82 and ASTM standards. However, you should always follow the manufacturer instructions and your local fire code when you install or service it.

Specifications For This Right Hand Chute Door

Overall dimensions for this side hinged intake door. Measure the cut-out in the chute wall, not the door panel and not the trim.

The stainless body resists rust and daily wear, and the keyed alike cylinder means one key opens every matching door on the same job. Full specifications are listed in the Additional information tab above.

Not sure this is your size? Run our free trash chute door fit check or call 203-304-9000 before you order.

References: MB2424, 2424SH, SH2424, SHU2424

Order This Right Hand Chute Door

Do you need help confirming fit? First, our team checks your opening size and hinge side. Then we guide your order. So call us at 203-304-9000 and we will help you pick the right part quickly.

This door replaces Midland, US Chutes, and Wilkinson Hi-Rise chute doors. We also build custom solutions for Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Hi-Rise Recycling Systems, Midland Metalcraft, Valiant Chutes, and Western Chutes. Simply contact us with your measurements for a custom quote.

The post 24″ x 24″ Right Hand – Side Hinged (SH) Chute Intake Door appeared first on Action Chutes.

This right hand chute door fits standard laundry and trash chute intakes. The unit hinges on the side, so it opens toward the right hand. Therefore it works well for new installs and for direct swaps of worn units.

No. 4 finish stainless steel forms the body. A border trim frames the opening. Also, the face shows no exposed welds or solder seams, so staff can wipe it clean in seconds. The front uses 20 gauge steel, while the back steps up to a heavier 18 gauge for strength, and we build every door in the USA.

Features Of This Intake Unit

Users open this unit by hand, and it then closes on its own. A keyed-alike cylinder lock secures it, while the latch holds it shut. Because the latch grabs each time, the panel stays closed after every use. Additionally, silent operation keeps hallway noise down.

Fire Rating

This panel carries a UL label, so it meets fire code needs. In fact, it holds a 1.5 hour rating with a UL Class B label at 250°F maximum temperature rise. In addition, our doors meet the latest national building codes, plus NFPA-82 and ASTM standards. However, you should always follow the manufacturer instructions and your local fire code when you install or service it.

Specifications For This Right Hand Chute Door

Overall dimensions for this side hinged intake door. Measure the cut-out in the chute wall, not the door panel and not the trim.

The stainless body resists rust and daily wear, and the keyed alike cylinder means one key opens every matching door on the same job. Full specifications are listed in the Additional information tab above.

Not sure this is your size? Run our free trash chute door fit check or call 203-304-9000 before you order.

References: MB1515, 1515SH, SH1515, SHU1515

Order This Right Hand Chute Door

Do you need help confirming fit? First, our team checks your opening size and hinge side. Then we guide your order. So call us at 203-304-9000 and we will help you pick the right part quickly.

This door replaces Midland, US Chutes, and Wilkinson Hi-Rise chute doors. We also build custom solutions for Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Hi-Rise Recycling Systems, Midland Metalcraft, Valiant Chutes, and Western Chutes. Simply contact us with your measurements for a custom quote.

The post 15″ x 15″ Right Hand – Side Hinged (SH) Chute Intake Door appeared first on Action Chutes.