Chute Door Hydraulic Closers & Closer Kits | Action Chutes

12″ Extension Spring for Wilkinson Chutes Bottom Hinged Door

revadmin — Fri, 04 Oct 2019 16:22:58 +0000

This 12″ extension spring is a replacement tension spring for a bottom-hinged Wilkinson chute door. It acts as a door closer, helping the intake door return to the closed position after use on trash chute and laundry chute doors.

How the Extension Spring Works

As the door opens, the spring stretches and stores tension. As a result, when the door is released, the spring helps pull it back toward the closed position. Moreover, a properly working closer keeps the chute door from being left open, which supports building cleanliness and safety.

Dimensions and Material

This tension spring measures 13 inches from end to end, and exactly 12 inches from the coil to the other end of the coil. In addition, the width of the spring is 1/2 inch. It is made of carbon steel, so it holds up well to repeated daily cycling on a busy chute door.

Fits Bottom Hinged Chute Doors

This part is designed for bottom-hinged doors on trash chute and laundry chute systems. Therefore, it is a straightforward replacement when your existing closer spring has weakened or broken. Please compare the measurements to your current spring before ordering to confirm the fit.

Order or Ask a Question

Ready to order, or not sure this extension spring fits your door? Simply call Action Chutes at 203-304-9000. Our team will confirm the correct spring for your bottom-hinged chute door and answer any installation questions you may have.

The post 12″ Extension Spring for Wilkinson Chutes Bottom Hinged Door appeared first on Action Chutes.

Split Rivet 3/4″ Long

revadmin — Fri, 04 Oct 2019 16:19:16 +0000

This split rivet is a 3/4″ long fastener used with hydraulic closers on chute doors. It is a small but important replacement part that helps hold closer hardware in place, and it is often used with Wilkinson Hi-Rise doors as well as doors from other manufacturers.

What This Split Rivet Is For

This 3/4″ long split rivet is designed for hydraulic closer assemblies. As a result, it is the kind of small part that is easy to lose during maintenance but essential for reassembling a closer correctly. Moreover, keeping a spare on hand can save time on future repairs.

Where It Is Used

This rivet is often used with Wilkinson Hi-Rise chute doors and with closers from other manufacturers. Therefore, it is a versatile fastener across many common chute door setups. In addition, it is a direct replacement when your original rivet is worn, bent, or missing.

Confirming the Right Fit

Because closer hardware varies by manufacturer and by model, we recommend confirming the rivet length and style you need before ordering. In addition, having your closer make and model on hand helps us verify the correct part quickly and accurately.

Order or Ask a Question

Ready to order, or not sure which fastener you need? Simply call Action Chutes at 203-304-9000. Our team will confirm the correct split rivet for your hydraulic closer and can help with related chute door hardware if you need it.

The post Split Rivet 3/4″ Long appeared first on Action Chutes.

Pin for Hydraulic Closer Steel Rivet

revadmin — Fri, 04 Oct 2019 16:17:12 +0000

This hydraulic closer pin secures the closer hardware on chute doors. It uses a steel rivet and a Tinnerman nut. Many Wilkinson Hi-Rise doors use this small part, and so do doors from other manufacturers.

What This Hydraulic Closer Pin Does

This pin holds the closer components together at the pivot point. As a result, it plays a key role even though it is small. It is also easy to lose during maintenance. Therefore, keep a spare on hand to save time on future repairs.

Where It Fits

Wilkinson Hi-Rise chute doors use this part, and so do closers from many other brands. Therefore, it fits a wide range of common chute door setups. It also serves as a direct replacement when your original pin wears out, bends, or goes missing.

Confirming the Right Fit

Closer hardware varies by brand and by model. For that reason, confirm the pin style you need before you order. Have your closer make and model ready. Then our team can verify the correct part quickly and avoid a wrong shipment.

Order or Ask a Question

Ready to order? Not sure which fastener you need? Simply call Action Chutes at 203-304-9000. Our team will confirm the right hydraulic closer pin for your door. We can also help with related chute door hardware.

The post Pin for Hydraulic Closer Steel Rivet appeared first on Action Chutes.

8″ Closer – Side Hinged Trash & Laundry Chute Door

revadmin — Fri, 04 Oct 2019 16:12:14 +0000

This 8 inch closer is a hydraulic door closer for side-hinged chute doors. It also works on some bottom-hinged intake doors. It fits Wilkinson Hi-Rise doors and many other popular garbage and linen chute doors.

How the 8 Inch Closer Works

This is a retracted shaft closure. The shaft retracts 3-1/4 inches as the door moves. As a result, it helps the intake door return to a closed position after use. Moreover, it keeps the door from being left open, which supports building cleanliness and safety.

What Is Included

The kit ships with the hydraulic closer, one (1) Clevis, and one (1) Tinnerman nut and rivet. Therefore, you get the mounting hardware you need to complete the repair. It installs as a direct replacement for a worn or leaking closer.

Door Sizes It Fits

This closer fits the following door sizes: 12 x 15, 14 x 17, 15 x 15, 18 x 18, 21 x 21, and 24 x 24. In addition, it suits trash chute and laundry chute doors. Please match your door size to this list before you order.

Order or Ask a Question

Need help selecting the proper part? Simply call Action Chutes at 203-304-9000, or email info@actionchutes.com with your request. Our team will confirm the correct 8 inch closer for your chute door. Parts typically ship the same or next day, while doors ship in about three weeks and custom orders take four to five weeks.

The post 8″ Closer – Side Hinged Trash & Laundry Chute Door appeared first on Action Chutes.

6″ Hydraulic Retracted Closer for Wilkinson Chutes Intake Door

revadmin — Thu, 03 Oct 2019 20:56:55 +0000

This hydraulic retracted closure is a 6 inch chute door closer. Builders often use it for bottom-hinged doors. It ships with one (1) Tinnerman nut and rivet. It suits Wilkinson Chutes intake doors and doors from other manufacturers.

How the Hydraulic Retracted Closure Works

This closer helps the intake door return to a closed position after use. As a result, it keeps the door from being left open. Moreover, a working closer supports building cleanliness and safety on trash and laundry chutes.

Dimensions

When fully extended, this closer measures 10-1/2 inches from end to end. From pin to pin, it measures 9-3/4 inches when extended. When fully retracted, it measures 8 inches from pin to pin. In addition, the cylinder itself is 6 inches long and 1 inch wide. Please compare these measurements to your current part before you order.

Where It Fits

This 6 inch closer works best on Wilkinson Chutes trash or laundry chute intake doors. However, many other manufactured doors use it too. Therefore, it is a versatile replacement across common chute setups.

Order or Ask a Question

Need help selecting the proper part? Simply call Action Chutes at 203-304-9000, or email info@actionchutes.com with your request. Our team will confirm the correct hydraulic retracted closure for your door. Parts typically ship the same or next day, while doors ship in about three weeks and custom orders take four to five weeks.

The post 6″ Hydraulic Retracted Closer for Wilkinson Chutes Intake Door appeared first on Action Chutes.

6″ Hydraulic Closer & Arm for Side Hinged Chute Intake Door

revadmin — Fri, 04 Oct 2019 01:53:46 +0000

This hydraulic closer and arm is a 6 inch retracted door closure kit for side-hinged chute intake doors. It ships as a complete set, so you get the closer plus the linkage parts needed to mount it on your door.

What Is Included

The kit includes the hydraulic closer, two (2) Clevis fittings, one (1) Butterfly bracket, and one (1) Rocker arm. Therefore, you receive the full linkage set for the repair. It installs as a direct replacement for a worn or leaking closer assembly.

How the Hydraulic Closer and Arm Works

The arm links the closer to the door. As a result, the closer helps the intake door return to a closed position after use. Moreover, this keeps the door from being left open, which supports building cleanliness and safety on trash and laundry chutes.

Where It Fits

This closer is ideally made to fit a 12 x 12 side-hinged Wilkinson Chutes intake door. However, many other manufactured doors use it too. Therefore, it is a versatile replacement across common chute setups. Please confirm your door size and hinge type before you order.

Order or Ask a Question

Need help selecting the proper part? Simply call Action Chutes at 203-304-9000, or email info@actionchutes.com with your request. Our team will confirm the correct hydraulic closer and arm for your door. Parts typically ship the same or next day, while doors ship in about three weeks and custom orders take four to five weeks.

The post 6″ Hydraulic Closer & Arm for Side Hinged Chute Intake Door appeared first on Action Chutes.

8″ Closer Extended Ball Stud Gas, Bottom Hinged Chute Door

revadmin — Thu, 03 Oct 2019 20:50:54 +0000

This ball stud gas closer is an 8 inch heavy-duty closer for bottom-hinged chute doors. It uses a compression gas spring, sometimes called a hydraulic closure. The gas spring gives a controlled opening force, so it helps intake doors that need assistance opening.

Specifications

This closer measures 15.6 inches when extended and 8.4 inches when compressed. It provides 30 lb of pressure. In addition, it uses ball socket end fittings with a spring clip. The closer rod has a black nitride finish, and the steel gas spring is nitride coated for durability.

Door Sizes It Fits

This part fits the following door sizes: 12 x 15, 14 x 17, and 15 x 15. Therefore, it suits many common bottom-hinged trash and laundry chute intake doors. Please match your door size to this list before you order. A photo of the measured product appears below this description.

Compatible With Many Manufacturers

Our extended closers suit many manufacturers, including Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Hi-Rise Recycling Systems, Midland Metalcraft Chutes, US Chutes, Valiant Chutes, Western Chutes, and Wilkinson Chutes. As a result, this ball stud gas closer fits a wide range of chute door setups.

Order or Ask a Question

Need help selecting the proper part? Simply call Action Chutes at 203-304-9000, or email info@actionchutes.com. Our team will confirm the correct closer for your door. Parts typically ship the same or next day, while doors ship in about three weeks and custom orders take four to five weeks.

The post 8″ Closer Extended Ball Stud Gas, Bottom Hinged Chute Door appeared first on Action Chutes.

17″ Chute Closer Extended Ball Stud Gas, Bottom Hinged Door

revadmin — Thu, 03 Oct 2019 20:48:37 +0000

This 17 inch chute closer (Model ML36-30) is a heavy-duty gas spring closer for bottom-hinged chute doors. It uses a compression gas spring, sometimes called a hydraulic closure. The gas spring gives a controlled opening force, so it helps larger intake doors that need assistance opening.

Specifications

This closer measures 17.2 inches when extended and 10.2 inches when compressed. It provides 30 lb of pressure. In addition, it uses ball socket end fittings with a spring clip. The closer rod has a black nitride finish, and the steel gas spring is nitride coated for durability.

Door Sizes It Fits

This part fits the following door sizes: 14 x 17, 15 x 18, 18 x 18, 21 x 18, 21 x 21, and 24 x 24. Therefore, it suits many larger bottom-hinged trash and laundry chute intake doors. Please match your door size to this list before you order. A photo of the measured product appears below this description.

Where It Is Used

Builders use this 17 inch chute closer on bottom-hinged intake doors across many chute systems. As a result, it is a versatile replacement for a worn or leaking gas closer. It installs as a direct swap when your original closer has failed.

Order or Ask a Question

The post 17″ Chute Closer Extended Ball Stud Gas, Bottom Hinged Door appeared first on Action Chutes.

Bracket Clevis – 8″ Side Hinged Hydraulic Closer

revadmin — Thu, 03 Oct 2019 20:19:43 +0000

This bracket clevis is a replacement linkage part for side-hinged chute door closers. Builders typically use it with an 8 inch hydraulic pump closure. It connects the closer to the door, so it restores proper closer movement on your intake door.

What This Bracket Clevis Is For

The clevis links the closer rod to the mounting bracket on a side-hinged door. As a result, it plays a key role in how smoothly the closer works. It is a small part, yet it is essential when you rebuild or repair a closer assembly.

Dimensions

This bracket measures 2 inches long. Therefore, you can compare it to your current part before you order. A close match on size helps ensure the clevis fits your closer and door setup correctly.

Compatible With Many Manufacturers

Our parts suit many manufacturers, including Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Midland Metalcraft Chutes, US Chutes, Valiant Chutes, and Western Chutes. As a result, this bracket clevis fits a wide range of common chute door closers.

Order or Ask a Question

Need help selecting the proper part? Simply call Action Chutes at 203-304-9000, or email info@actionchutes.com. Our team will confirm the correct bracket clevis for your closer. Parts typically ship the same or next day, while doors ship in about three weeks and custom orders take four to five weeks.

The post Bracket Clevis – 8″ Side Hinged Hydraulic Closer appeared first on Action Chutes.

Bracket Clevis – 10″ Bottom Hinged Hydraulic Closer

revadmin — Thu, 03 Oct 2019 20:17:19 +0000

This bottom hinged bracket clevis is a replacement linkage part for bottom-hinged chute door closers. Builders typically use it with a 10 inch hydraulic pump closure. It connects the closer to the door, so it restores proper closer movement on your intake door.

What This Bracket Clevis Is For

The clevis links the closer rod to the mounting bracket on a bottom-hinged door. As a result, it plays a key role in how smoothly the closer works. It is a small part, yet it is essential when you rebuild or repair a closer assembly.

Dimensions

This bracket measures 1-1/4 inches long. Therefore, you can compare it to your current part before you order. A close match on size helps ensure the clevis fits your closer and door setup correctly.

Compatible With Many Manufacturers

Our parts suit many manufacturers, including Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Midland Metalcraft Chutes, US Chutes, Valiant Chutes, and Western Chutes. As a result, this bottom hinged bracket clevis fits a wide range of common chute door closers.

Order or Ask a Question

Need help selecting the proper part? Simply call Action Chutes at 203-304-9000, or email info@actionchutes.com. Our team will confirm the correct clevis for your closer. Parts typically ship the same or next day, while doors ship in about three weeks and custom orders take four to five weeks.

The post Bracket Clevis – 10″ Bottom Hinged Hydraulic Closer appeared first on Action Chutes.