15″ x 15″ Right Hand – Side Hinged (SH) Intake Access Door

revadmin — Thu, 03 Oct 2019 17:58:52 +0000

The 15 inch by 15 inch right hand side hinged intake door is a stainless steel chute door. It is built for trash and laundry chute systems. The door is hand operated, silent, self closing, and self latching. It also has a cylinder lock that is keyed alike across your building. The side hinged design lets the door swing open to the side. As a result, it works well where headroom above the opening is limited.

Side Hinged Intake Door Specifications

Size: 15 inch by 15 inch opening, right hand, side hinged
Stainless steel with a No. 4 finish and border trim, no exposed welds or solder seams
Hand operated, silent, self closing, and self latching
Cylinder lock keyed alike
UL labeled and UL Certified, 1.5 hour fire rated, UL Class B Label, 250 F maximum temperature rise
20 gauge front and heavier 18 gauge back for added strength
Complies with NFPA-82 and ASTM standards and current national building codes
Made in the USA

Why choose a stainless steel intake door

Stainless steel stands up to daily use and cleaning. Because of this, it fits busy buildings like apartments, hospitals, hotels, and dormitories. The No. 4 finish resists corrosion. It also wipes down easily. In addition, the 20 gauge front and 18 gauge back add strength at the point of contact. Finally, the door is self closing and self latching. As a result, it returns to a closed and locked position after every use. This supports the fire rating of the chute system.

What it fits

This 15 inch intake door can replace Midland, US Chutes, and Wilkinson Hi Rise chute doors. In addition, we build custom sizes for many other manufacturers. If you are not sure which size or hinge type your building needs, send us your measurements. Then we will confirm the right fit.

Ordering and lead time

We build these doors to order. We also offer custom size solutions for new construction and replacement projects. Call us at 203-304-9000 with your opening size and requirements. Then we will provide a quote and confirm current lead times. If you need faster shipping, just call. We will do our best to help.

Measure the cut-out in the chute wall, not the door panel and not the trim. Not sure? Run our free trash chute door fit check or call 203-304-9000 before you order.

References: MB1515, 1515SH, SH1515, SHU1515

This door replaces Midland, US Chutes, and Wilkinson Hi-Rise chute doors. We also build custom solutions for Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Hi-Rise Recycling Systems, Midland Metalcraft, Valiant Chutes, and Western Chutes. Simply contact us with your measurements for a custom quote.

The post 15″ x 15″ Right Hand – Side Hinged (SH) Intake Access Door appeared first on Action Chutes.

15″ x 15″ Left Hand – Side Hinged (SH) Intake Access Door

revadmin — Thu, 03 Oct 2019 17:56:46 +0000

This 15×15 side hinged door is a left-hand (SH) intake access door for trash and laundry chutes. Moreover, it arrives ready to install with a self-closing, self-latching design and a keyed-alike cylinder lock. As a result, it gives you secure, quiet, hands-free operation.

Features and Operation

This door operates by hand, closes silently, and closes itself automatically. In addition, it latches itself, and the cylinder locks match each other key for key. Therefore, building staff can manage many doors with just one key.

Construction

Stainless steel with a No. 4 finish gives this door a clean, durable surface. Furthermore, it includes border trim and shows no exposed welds or solder seams. The front uses 20 gauge steel, while the back steps up to a heavier 18 gauge for strength. We build every door in the USA.

Fire Rating and Code Compliance

UL labels and certifies all our doors. Specifically, this door carries a 1.5 hour fire rating with a UL Class B label and a 250°F maximum temperature rise. In addition, our doors meet the latest national building codes, plus NFPA-82 and ASTM standards. Please follow the manufacturer instructions and your local fire code during installation.

Compatibility and Custom Sizes

This 15×15 side hinged door replaces Midland, US Chutes, and Wilkinson Hi-Rise chute doors. We also build custom solutions for Acme Chutes, American Chute Systems, Century Chutes, Chutes International, Cutler Chutes, Hi-Rise Recycling Systems, Midland Metalcraft, Valiant Chutes, and Western Chutes. Simply contact us with your measurements for a custom quote.

Order or Ask a Question

Need help selecting the proper door? Simply call Action Chutes at 203-304-9000, or email info@actionchutes.com. Then our team will confirm the correct 15×15 side hinged door for your building or new construction.